Solar Panel
After doing a lot of searching online, I decided to go with a 100 watt panel from sunwindproducts. I was very happy with the customer service, prices and options. If you are in the market for solar or wind products, check them out. It's early in the game, but the panel seems to be doing exactly what it says it would and is putting the amps into the batteries as expected.We decided to mount the panel to the stern rail with hinges that will allow it to be swung down in bad weather. Used a deck fitting for the wires, but other than that, it was straight forward.
The charge controller is a basic 7 amp unit from Sunforce. Since I only have the one panel generating less than 7 amps, I didn't see a need to spend hundreds of dollars on a bigger unit. It fits nicely behind the nav station making it easier to hook into the system. Both the solar panel and wind generator can be set by the main battery switch to charge what ever battery bank I want. Of course the house bank gets most of the juice, but in an unforeseeable happenstance that both banks are drained, I can send all the power to the starting battery and get the engine running.Nav Station
These were all placed in a custom built panel that was mounted on the starboard side shelves above the quarter birth. It's a great feeling to know that when I flip a switch, it's going to work. It was a big job sifting through the rats nest that was there, but Ralph knocked this one out of the park.
* As you might have noticed, I am still waiting for the new breaker panel labels to arrive. I promise there are no trim tabs on Skylark.
LPG Solenoid, Switch and Tank Locker
Skylark did not come with a propane tank locker, so we had to build one. Actually, we were able to get a "tub" that would fit a 20 pound tank that was left long ago and sitting in the marina. From there, Ralph cut a hole in the aft "seat" behind the tiller and mounted the tank from underneath. There was plenty of room below that area in the locker, so it was the perfect place for it. A spill hole, tube and through-hull were installed to get the propane gas overboard in case of a leak, the purpose really for the locker in the first place. A square water proof hatch was then installed over the tank making it very easy to replace when necessary.
In addition, a solenoid control switch was installed in the galley which operates the solenoid valve attached to the tank. This is a safety feature that allows you to easily turn the propane off from the galley as well as monitors pressure from the tank.So that's it, time to start enjoying the fruits of out labor.
Posts
